Linux Skills

Linux Skills

Linux Skills

In this post, I will record the daily usage of linux, as well as the ways to resolve the common problems.

1 How to use ramdisk in Ubuntu and Fedora?

In Fedora, the ramdisk is disabled by default, that is, it is compiled into the kernel, but as a module, which will be loaded into the kernel when actually used. So, it is necessary to compile the kernel manually to select the ramdisk as the built-in modules.

In Ubuntu, the ramdisk support is enabled by default, so the steps are easier compared to Fedora.

Using the following commands to list the ramdisk:

ls /dev/ram*

The output will be like:

/dev/ram0 /dev/ram10 /dev/ram12 /dev/ram14 /dev/ram2 /dev/ram4 /dev/ram6 /dev/ram8
/dev/ram1 /dev/ram11 /dev/ram13 /dev/ram15 /dev/ram3 /dev/ram5 /dev/ram7 /dev/ram9

Format the ramdisk as an ext4fs:

mkfs.ext4 /dev/ram1

Then mount it:

sudo mount /dev/ram1 /mnt

2 How to enable ssh server in Ubuntu?

By default, Ubuntu doesn‘t install the ssh server, so the following command will fail:

ssh localhost
ssh: connect to host localhost port 22: Connection refused

Using the following command to install the ssh-server:

sudo apt-get install openssh-server

Then all things will go well.

3 How to disable CPU in Linux?

It is easy to do with real root user:

echo 0 > /sys/devices/system/cpu/cpuX/online

The CPU status can be checked by:

cat /proc/cpuinfo

To re-enable the CPU:

echo 1 > /sys/devices/system/cpu/cpuX/online

4 How to disable SELinux in Linux?

The SELinux has some negative effect on the self-defined filesystem, so it is necessary to disable it, using the following command:

sestatus \\

will list the status of the SELinux,

SELinux status: enabled
SELinuxfs mount: /sys/fs/selinux
SELinux root directory: /etc/selinux
Loaded policy name: targeted
Current mode: enforcing
Mode from config file: enforcing
Policy MLS status: enabled
Policy deny_unknown status: allowed
Max kernel policy version: 28

To change the status of SELinux, modify the configure file in:

/etc/selinux/config \\

5 How to deal with the errors in MP3 files in Rythmbox under Ubuntu?

The easiest way is as follows:

sudo gedit /etc/profile

Add the following two lines to the end of the file:

export PATH=$PATH GST_ID3_TAG_ENCODING=GBK:UTF-8:GB18030
export PATH=$PATH GST_ID3V2_TAG_ENCODING=GBK:UTF-8:GB18030

This enables the Chinese characters to be recoginized by the system.

6 How to accelerate the ssh connection?

I am working on a project which has something to do with a remote server, and I have to ssh to that server, but the server is Fedora and my os is Ubuntu, and it turns out it takes a long time to resove the host/server IP, the solution to this problem is:

ssh -o GSSAPIAuthentication=no user@yourserver

7 When something goes wrong in ubuntu ?

Afer a failed attempt to upgrade the Ubuntu13.10 to Ubuntu 14.04, the system shows a popup window everytime the system boots, the title of the window is "System Program Problem Detected". The following method can be used to solve the problem:

sudo rm /var/crush/*

This command will delete the crushed software of the system so that the reporting utility won‘t work, thus eliminating the annoying message.

8 How to umount a filesystem even when it is busy?

Recently, a project requires frequently mounting and testing a filesystem, and it is very likely that the newly-mounted filesystem will crash for all kinds of reasons, and after the accident, it is no longer possible to umount the filesystem in a normal way. The error message from the OS is as follows:

With the -l option of umount, the result can be seen as follows:

9 How to sync files without copying the originals when using Cloud Storage?

When using CloudDrive, it is likely that the software may only allow you to synchronize the files or folders under a specific folder, if you have many other directories to synchronize, you have to copy files, but there is a simple way to achieve the same goal without copying files—the symbolic link.
In Linux,the following command can be used to create a symbolic link to another directory:

ln -s target-folder link-name

\

In windows, use the following command:

mklink /J link-name target-folder

10 How to rename multiple files at a time?

  1. Add extention to all the files in a directory: \
    for f in *;do mv "$f" "$f.png";done
  2. Rename: \
    rename ‘s/old-name/new-name/‘ files

11 What is the most amazing ssh option you have encountered?

The first useful option of ssh is the GSSAPIAuthentication=no, which accelerates the connection startup time. Another useful option is the X11 forwarding, with the -X option, you can use the X11 application from the localhost.(Especially for emacs).

12 When Ubuntu Xsession goes wrong….

The problem I encountered is like this:
When I want to logout the xsession of ubuntu, it fails to close all the running application and return back to the login screen, so I start a terminal by ALT+CRTL+F1, from which I did a reboot. After the system booted, I typed my password to my account, but it returned back to the login session again, and the process continued.

There was some error messages in ~/.xsession-error file, and the mode bits of ~/.xauthority file has changed to root only, so the correct way to deal with the problem is use the following command:

sudo chmod +x 777 .Xauthority

13 How to change ubuntu Mirroe source?

Copy the existing source configure file to the desired machine,the file is:

/etc/apt/sources.list

14 How to add a new directory to an existing CVS repository?

I have a working copy of a cvs-controlled repository, and after I added some new directories, I failed to add the files in the directories to the version control system, because the CVS complains that the node corresponding to the new directory does not exist, the simplest method to solve this problem is the cvs add command:

cvs add newdirectory

Then, in emacs, just type c-x v v, all things will be handled by the smart emacs…

15 How to set up multiple CVSROOT repositories?

The repositories I use on my machine is not under cloud back-up, so I just want to backup my repositories to my cloud, so I followed the following steps:

  1. Create and init the new repository but override the existing CVSROOT environment:
    cvs -d /home/wujing/KuaiPan/myrepos init
  2. To make sure that the proper CVSROOT directory is correctly setup, ls the directory;
  3. Import the project files into the new CVS repository:
    cvs -d /home/wujing/KuaiPan/myrepos import -m "start papers backup" memory_contention wujing start

    In the above command, the files in the source files in the project directory will be copied into the CVS/memory_contention directory.

  4. Backup the original files and checkout the versioned files from the cvs repository:
    cvs -d /home/wujing/KuaiPan/myrepos co memory_contention

    Be sure to specify the correct cvsroot with the -d option.
    Note:Be careful about the current working directory when using import and checkout command.

16 Whether it is possible to copy an existing cvs repository into the new repository?

I tried to copy the entire directory and checkout from the new repository, it works fine, which means that the CVSROOT repository can be migrated easily.

17 How to checkout from a remote repository?

I am working with multiple computers, and I want to keep the source files be synchronized among all of them, and these source files are under cvs control in my localhost, so just do a checkout from the remote computer with the following command:

cvs -d :ext:[email protected]:/home/wujing/myrepos co shell

Make sure that the ssh connection is enabled in the remote host. When I am trying to commit the changes to the remote host, the emacs complains about the missing ssh-askpass file, the right way to solve this problem is to use password-less ssh connection, the detailed steps are as follows:
Suppose my working host1‘s IP is 172.31.8.22, the working host2‘s ip is 172.20.161.56, and the repository is located in host1, so when I ssh to host2 from host1 and want to commit the changes to host1, host2 must have access to host1 without password, do the following configuration:

17.1 Create Authentication SSH-Kegen Keys on host1

The screen-shot is as follows:

17.2 Create .ssh Directory on host2

Using the following command:

17.3 Upload Generated Public Keys to host2

Command:

17.4 Set Permissions on host2

Command:

OK, that‘s it, the connection can now operate without password.

Author: wujing

Created: 2014-07-09 三 15:45

Emacs 24.3.1 (Org mode 8.2.6)

Validate

Linux Skills,古老的榕树,5-wow.com

郑重声明:本站内容如果来自互联网及其他传播媒体,其版权均属原媒体及文章作者所有。转载目的在于传递更多信息及用于网络分享,并不代表本站赞同其观点和对其真实性负责,也不构成任何其他建议。