再谈ORACLE CPROCD进程

罗列一下有关oprocd的知识点

oprocd是oracle在rac中引入用来fencing io的

在unix系统下，如果我们没有采用oracle之外的第三方集群软件，才会存在oprocd进程

在linux系统下，只有在10.2.0.4版本后，才会具有oprocd进程

在window下，不会存在oprocd 进程，但是会存在一个oraFenceService服务，用来实现相同的功能，该服务采用的技术是基于windows的，与oprocd不同

oprocd进程可以运行在两者模式下：fatal和no fatal，在fatal模式下，如果系统hang住，或者其他原因触发oprocd则oprocd进程会自动重启服务器。在no fatal模式下，如果系统hang住，或者其他原因触发oprocd进程，则oprocd进程会在日志中记录警告信息，但是不会重启系统。

oprocd进程具有两个参数：timeout 指定oprocd进程调用的时间间隔   margin 指定允许的时间偏差，如果时间偏差超过margin，则oprocd进程会重启系统或者记录错误信息到日志。

oprocd进程的日志文件位于：/etc/oracle/oprocd  或者 /var/opt/oracle/oprocd

oprocd进程从cssd进程派生而来，并且以root用户身份允许

[root@node2 init.d]# ps -ef | grep oprocd
root      5109 11227  0 20:37 pts/0    00:00:00 grep oprocd
root      5758  4849  0 19:14 ?        00:00:00 /bin/sh /etc/init.d/init.cssd oprocd
root      6084  5758  0 19:14 ?        00:00:00 /u01/app/crs_home/bin/oprocd.bin run -t 1000 -m 10000 -hsi 5:10:50:75:90 -f

通常情况下，我们可以将oprocd进程重启系统的原因归为四类：

1:：操作系统的调度问题

2：操作系统的存在硬件或者驱动问题

3：系统具有大量负载，导致调度程序无法及时调入oprocd进程

4：oracle bug

Bug 5015469 – OPROCD may reboot the node whenever the system date is moved

backwards.
Fixed in 10.2.0.3+
Fixed in 10.1.0.3 + One off patch for Bug 4206159.
Fixed in 10.2.0.4+
Fixed in 10.2.0.3+

Bug 4206159 – Oprocd is prone to time regression due to current API used (AIX only)

Diagnostic Fixes (VERY NECESSARY IN MOST CASES):

Bug 5137401 – Oprocd logfile is cleared after a reboot

Bug 5037858 – Increase the warning levels if a reboot is approaching

oprocd进程的两个参数：timeout和margin，其默认值在init.cssd 文件中指定，如

[root@node2 init.d]# cat init.cssd | grep ^OPROCD_DEFAULT_
OPROCD_DEFAULT_TIMEOUT=1000
OPROCD_DEFAULT_MARGIN=500
OPROCD_DEFAULT_HISTORGRAM=

如果需要突破1.5s的限制，我们可以调用init.cssd来实现目的，通过调用init.cssd可以修改两个参数：reboottime  和 diagwait，如果diagwait> reboottime,那么margin=diagwait-reboottime。在设置diagwait时，需要将集群中所有节点的所有进程停掉，都在可以造成数据损坏，只需在rac中的一个节点修改即可。建议将diagwait修改为13

[root@node2 bin]# ./crsctl get css reboottime
3
[root@node2 bin]# ./crsctl get css diagwait
13
[root@node2 bin]# ./crsctl set css diagwait 13 -force

在windows下我们也可以修改diagwait，但是与在linux下不同，修改diagwait不会造成上面的变化。

下面再来看一下有关hangcheck_timer的有关信息，hangcheck_timer与oprocd可以实现相同的功能，但是两者之间没有必然的联系

Hangcheck-Timer Module
Hangcheck-Timer Module Requirements for Oracle 9i, 10g, and 11g RAC on Linux
Starting in release 9.2.0.2 and later, Oracle RAC environments required using a new I/O fencing model, named the hangcheck-timer module. This module was implemented to replace the Watchdog module, which provided similar fencing functionality. Hangcheck-timer was subsequently delivered as part of the standard kernel distribution for Linux kernel releases 2.4 and above.
Hangcheck-timer should be loaded at boot time, and monitors the Linux kernel for long operating system hangs that could affect the reliability of a RAC node.  It runs in kernel mode and uses the Time Stamp Counter (TSC) to catch scheduling delays or node hangs.  This is done by setting a timer, then checking when the timer fires as to whether it was delayed by more than the allowed margin of error.  If the duration exceeds the allowed time of (hangcheck_tick + hangcheck_margin seconds), the machine is restarted.  Hangcheck-timer will not cause reboots to occur due to CPU starvation.
 Hangcheck-timer requires three configuration parameters:
    hangcheck_tick - defines how often, in seconds, the hangcheck-timer checks the node for hangs. The default value is 60 seconds.
    hangcheck_margin - defines how much margin is allowed, in seconds, between expected scheduling and real scheduling time. The default value is 180 seconds.
    hangcheck_reboot - determines if the hangcheck-timer restarts the node if the kernel fails to respond within the sum of the hangcheck_tick and hangcheck_margin parameter values. If the value of hangcheck_reboot is equal to or greater than 1, then the hangcheck-timer module restarts the system. If the hangcheck_reboot parameter is set to zero, then the hangcheck-timer module will not reboot the node, even if a hang is detected.   The default value varies by kernel version.  In the 2.4 kernel, the default is 1.  In 2.6 kernels, the default is 0.
Hangcheck-timer will provide message logging to the system messages log when a failure is detected, and a node restart is initiated by the module:
    When Hangcheck-timer reboots it may leave "Hangcheck: hangcheck is restarting the machine" message in /var/log/messages
    If you see the following message in /var/log/messages:  "Hangcheck: hangcheck value past margin!" this means a reboot was required but was not performed, because hangcheck_reboot was not set to 1.  If this message is seen, you must reload the hangcheck module as described earlier in this note, with the hangcheck_reboot value set to 1.
Note : Hangheck timer is not required starting with Oracle Clusterware 11gR2

再谈ORACLE CPROCD进程,古老的榕树,5-wow.com