Linux系统硬件信息
浏览数：24 /
时间：2015年06月20日
对于linux系统硬件信息的查看，主要针对cpu、memory、disk，以及网卡，每一种硬件的信息通常会有多种查看方法。
1.cpu
查看/proc/cpuinfo文件 可查看cpu的详细信息。
[root@primary_server ~]# cat /proc/cpuinfo vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Xeon(TM) CPU 2.80GHz stepping : 3 cpu MHz : 2793.385 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl cid cx16 xtpr bogomips : 5586.77 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Xeon(TM) CPU 2.80GHz stepping : 3 cpu MHz : 2793.385 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pni monitor ds_cpl cid cx16 xtpr bogomips : 5586.40
[root@primary_server ~]# dmidecode -t dmidecode: option requires an argument -- t Type number or keyword expected Valid type keywords are: bios system baseboard chassis processor memory cache connector slot
dmidecode命令功能很全，可以针对bios 系统 cpu 内存 cache等信息进行查看。
[root@primary_server ~]# dmidecode -t processor # dmidecode 2.11 SMBIOS 2.3 present. Handle 0x0400, DMI type 4, 40 bytes Processor Information Socket Designation: PROC_1 Type: Central Processor Family: Xeon Manufacturer: Intel ID: 43 0F 00 00 FF FB EB BF Signature: Type 0, Family 15, Model 4, Stepping 3 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Multi-threading) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Not Specified Voltage: 1.4 V External Clock: 800 MHz Max Speed: 3600 MHz Current Speed: 2800 MHz Status: Populated, Enabled Upgrade: ZIF Socket L1 Cache Handle: 0x0700 L2 Cache Handle: 0x0701 L3 Cache Handle: 0x0702 Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Core Count: 1 Core Enabled: 1 Thread Count: 2 Characteristics: 64-bit capable
2.内存
[root@primary_server ~]# free -m //以MB为单位,总共1010MB，不是太大. total used free shared buffers cached Mem: 1010 874 135 0 176 570 -/+ buffers/cache: 127 882 Swap: 2047 0 2047
[root@primary_server ~]# cat /proc/meminfo MemTotal: 1034460 kB MemFree: 139632 kB Buffers: 180964 kB Cached: 584252 kB SwapCached: 0 kB
dmidecode -t memory # dmidecode 2.11 SMBIOS 2.7 present. Handle 0x0008, DMI type 16, 23 bytes Physical Memory Array Location: System Board Or Motherboard .... Maximum Capacity: 32 GB .... Handle 0x000A, DMI type 17, 34 bytes .... Memory Device Array Handle: 0x0008 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 4096 MB .....
3.磁盘
查看硬盘和分区的详细信息
[root@primary_server ~]# fdisk -l Disk /dev/sda: 73.4 GB, 73407820800 bytes 64 heads, 32 sectors/track, 70007 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Device Boot Start End Blocks Id System /dev/sda1 * 1 100 102384 83 Linux /dev/sda2 101 70007 71584768 8e Linux LVM
4.网卡
查看网卡硬件信息
[root@primary_server ~]# ifconfig // 查看当前所有UP的端口 eth0 Link encap:Ethernet HWaddr 00:13:72:57:78:18 inet addr:61.8.42.250 Bcast:61.8.42.251 Mask:255.255.255.252 inet6 addr: fe80::213:72ff:fe57:7818/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1873816 errors:0 dropped:0 overruns:0 frame:0 TX packets:2121831 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:246357050 (234.9 MiB) TX bytes:513284407 (489.5 MiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1505716 errors:0 dropped:0 overruns:0 frame:0 TX packets:1505716 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:209398529 (199.6 MiB) TX bytes:209398529 (199.6 MiB)
查看系统的所有网络接口
[root@primary_server ~]# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:13:72:57:78:18 inet addr:61.8.42.250 Bcast:61.8.42.251 Mask:255.255.255.252 inet6 addr: fe80::213:72ff:fe57:7818/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1874317 errors:0 dropped:0 overruns:0 frame:0 TX packets:2122385 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:246430249 (235.0 MiB) TX bytes:513372929 (489.5 MiB) eth1 Link encap:Ethernet HWaddr 00:13:72:57:78:19 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1505820 errors:0 dropped:0 overruns:0 frame:0 TX packets:1505820 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:209409405 (199.7 MiB) TX bytes:209409405 (199.7 MiB) sit0 Link encap:IPv6-in-IPv4 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
查看某个网口的详细信息
[root@primary_server ~]# ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: umbg Wake-on: d Current message level: 0x00000007 (7) Link detected: yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full ..... Speed: 100Mb/s #现在网卡的速度是100Mb,网卡使用自适应模式，所以推测路由是100Mb，导致网卡从支持千兆，变成要支持百兆 Duplex: Full #全双工 ..... Link detected: yes #表示有网线连接，和路由是通的
本文出自 “yangang” 博客，请务必保留此出处http://yangang.blog.51cto.com/4449016/1426571
郑重声明：本站内容如果来自互联网及其他传播媒体，其版权均属原媒体及文章作者所有。转载目的在于传递更多信息及用于网络分享，并不代表本站赞同其观点和对其真实性负责，也不构成任何其他建议。
