Android4.4 Telephony流程分析——SIM卡开机时的数据加载
浏览数：32 /
时间：2015年06月11日
本文代码以MTK平台Android 4.4为分析对象，与Google原生AOSP有些许差异，请读者知悉。
本文主要介绍sim卡数据的读取过程，当射频状态处于准备状态时，此时UiccCardApplication应处于AppState.APPSTATE_READY状态，我们沿着这个信号跟踪下去。阅读本文时可先阅读Android4.4 Telephony流程分析——SIM卡开机时的初始化一文，了解Radio和sim卡状态更新过程。
先来看一下数据加载的序列图：
step1~step3，走的是更新过程，创建过程参考Android4.4 Telephony流程分析——SIM卡开机时的初始化一文step21之后的步骤。
step4，通过Modem查询sim卡的FDN(固定拨号)数据。
step5，通过Modem查询sim卡的pin1状态。
step6~step7，将pin1状态通知出去，IccCardProxy会注册mPinLockedRegistrants。
step8~step9，将sim卡ready状态发出去。
private void notifyReadyRegistrantsIfNeeded(Registrant r) {
if (mDestroyed) {
return;
}
if (mAppState == AppState.APPSTATE_READY) {
if (mPin1State == PinState.PINSTATE_ENABLED_NOT_VERIFIED ||
mPin1State == PinState.PINSTATE_ENABLED_BLOCKED ||
mPin1State == PinState.PINSTATE_ENABLED_PERM_BLOCKED) {
loge("Sanity check failed! APPSTATE is ready while PIN1 is not verified!!!");
// Don't notify if application is in insane state
return;
}
if (r == null) {
if (DBG) log("Notifying registrants: READY");
mReadyRegistrants.notifyRegistrants();
} else {
if (DBG) log("Notifying 1 registrant: READY");
r.notifyRegistrant(new AsyncResult(null, null, null));
}
}
}如果此时pin1是被激活的，也就是sim卡开启了pin1锁，sim卡ready状态就不会发出去。
监听mReadyRegistrants状态变化的对象很多，主要有:SIMRecords（同类的还有RuimRecords、IsimUiccRecords），IccCardProxy（会将SIM卡状态广播出去），GsmServiceStateTracker（会根据SIM状态去注册网络），这里主要说一下SIMRecords，读取SIM的数据。
step12，fetchSimRecords()方法:
//MTK-END [mtk80601][111215][ALPS00093395]
protected void fetchSimRecords() {
mRecordsRequested = true;
if (DBG) log("fetchSimRecords " + mRecordsToLoad);
mCi.getIMSIForApp(mParentApp.getAid(), obtainMessage(EVENT_GET_IMSI_DONE));//读IMSI
mRecordsToLoad++;
//iccFh.loadEFTransparent(EF_ICCID, obtainMessage(EVENT_GET_ICCID_DONE));
//mRecordsToLoad++;
// FIXME should examine EF[MSISDN]'s capability configuration
// to determine which is the voice/data/fax line
//new AdnRecordLoader(phone).loadFromEF(EF_MSISDN, EF_EXT1, 1,
//obtainMessage(EVENT_GET_MSISDN_DONE));
//recordsToLoad++;
// Record number is subscriber profile
mFh.loadEFLinearFixed(EF_MBI, 1, obtainMessage(EVENT_GET_MBI_DONE));
mRecordsToLoad++;
mFh.loadEFTransparent(EF_AD, obtainMessage(EVENT_GET_AD_DONE));
mRecordsToLoad++;
// Record number is subscriber profile
mFh.loadEFLinearFixed(EF_MWIS, 1, obtainMessage(EVENT_GET_MWIS_DONE));
mRecordsToLoad++;
// Also load CPHS-style voice mail indicator, which stores
// the same info as EF[MWIS]. If both exist, both are updated
// but the EF[MWIS] data is preferred
// Please note this must be loaded after EF[MWIS]
mFh.loadEFTransparent(
EF_VOICE_MAIL_INDICATOR_CPHS,
obtainMessage(EVENT_GET_VOICE_MAIL_INDICATOR_CPHS_DONE));
mRecordsToLoad++;
// Same goes for Call Forward Status indicator: fetch both
// EF[CFIS] and CPHS-EF, with EF[CFIS] preferred.
mFh.loadEFLinearFixed(EF_CFIS, 1, obtainMessage(EVENT_GET_CFIS_DONE));
mRecordsToLoad++;
mFh.loadEFTransparent(EF_CFF_CPHS, obtainMessage(EVENT_GET_CFF_DONE));
mRecordsToLoad++;
//getSpnFsm(true, null);
mFh.loadEFTransparent(EF_SPDI, obtainMessage(EVENT_GET_SPDI_DONE));
mRecordsToLoad++;
//mFh.loadEFLinearFixed(EF_PNN, 1, obtainMessage(EVENT_GET_PNN_DONE));
//recordsToLoad++;
mFh.loadEFTransparent(EF_SST, obtainMessage(EVENT_GET_SST_DONE));
mRecordsToLoad++;
mFh.loadEFTransparent(EF_INFO_CPHS, obtainMessage(EVENT_GET_INFO_CPHS_DONE));
mRecordsToLoad++;
mFh.loadEFTransparent(EF_CSP_CPHS,obtainMessage(EVENT_GET_CSP_CPHS_DONE));
mRecordsToLoad++;
mFh.loadEFTransparent(EF_GID1, obtainMessage(EVENT_GET_GID1_DONE));
mRecordsToLoad++;
/*
Detail description:
This feature provides a interface to get menu title string from EF_SUME
*/
if (mTelephonyExt != null) {
if (mTelephonyExt.isSetLanguageBySIM()) {
mFh.loadEFTransparent(EF_SUME, obtainMessage(EVENT_QUERY_MENU_TITLE_DONE));
mRecordsToLoad++;
}
} else {
loge("fetchSimRecords(): mTelephonyExt is null!!!");
}
fetchCPHSOns();
// XXX should seek instead of examining them all
if (false) { // XXX
mFh.loadEFLinearFixedAll(EF_SMS, obtainMessage(EVENT_GET_ALL_SMS_DONE));
mRecordsToLoad++;
}
if (CRASH_RIL) {
String sms = "0107912160130310f20404d0110041007030208054832b0120"
+ "fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff"
+ "fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff"
+ "fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff"
+ "fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff"
+ "ffffffffffffffffffffffffffffff";
byte[] ba = IccUtils.hexStringToBytes(sms);
mFh.updateEFLinearFixed(EF_SMS, 1, ba, null,
obtainMessage(EVENT_MARK_SMS_READ_DONE, 1));
}
if (DBG) log("fetchSimRecords " + mRecordsToLoad + " requested: " + mRecordsRequested);
/*
* Here, we assume that PHB is ready and try to read the entries.
* If it is not, we will receive the event EVENT_PHB_READY later.
* Then, we will ready the PHB entries again.
*/
fetchPhbRecords();//读adn联系人
fetchRatBalancing();
}读SIM卡是要通过Modem的，上层读Modem就得通过RIL，我们以读ADN联系人fetchPhbRecords()为例，来看看读取过程step13~step22，主要是通过IccFileHandler实现，先请求adn的长度(step16~step19)，然后再请求具体的adn联系人数据step20~step22，这个过程就是与Modem交互的过程，读者可以先了解一下SIM卡的文件结构，才能更好的理解为什么这样读，我也不甚熟悉。
step23，获取SIM卡内置的紧急号码，这个是由运营商定制的。
step24~step26，当需要load的数据都load完成，才会执行，再在onAllRecordsLoaded中发布mRecordsLoadedRegistrants通知。
protected void onRecordLoaded() {
// One record loaded successfully or failed, In either case
// we need to update the recordsToLoad count
mRecordsToLoad -= 1;
if (DBG) log("onRecordLoaded " + mRecordsToLoad + " requested: " + mRecordsRequested);
if (mRecordsToLoad == 0 && mRecordsRequested == true) {
onAllRecordsLoaded();
} else if (mRecordsToLoad < 0) {
loge("recordsToLoad <0, programmer error suspected");
mRecordsToLoad = 0;
}
}step27之后的步骤，都是对mRecordsLoadedRegistrants侦听的响应，IccCardProxy侦听到后，会发广播给外界:
private void broadcastIccStateChangedIntent(String value, String reason) {
synchronized (mLock) {
if (mQuietMode) {
log("QuietMode: NOT Broadcasting intent ACTION_SIM_STATE_CHANGED " + value
+ " reason " + reason);
return;
}
Intent intent = new Intent(TelephonyIntents.ACTION_SIM_STATE_CHANGED);
//intent.addFlags(Intent.FLAG_RECEIVER_REPLACE_PENDING);
intent.putExtra(PhoneConstants.PHONE_NAME_KEY, "Phone");
intent.putExtra(IccCardConstants.INTENT_KEY_ICC_STATE, value);
intent.putExtra(IccCardConstants.INTENT_KEY_LOCKED_REASON, reason);
intent.putExtra(PhoneConstants.GEMINI_SIM_ID_KEY, mSimId);
if (DBG) log("Broadcasting intent ACTION_SIM_STATE_CHANGED " + value
+ " reason " + reason + " sim id " + mSimId);
ActivityManagerNative.broadcastStickyIntent(intent, READ_PHONE_STATE,
UserHandle.USER_ALL);
}
}
public void broadcastIccStateChangedExtendIntent(String value, String reason) {
synchronized (mLock) {
if (mQuietMode) {
log("QuietMode: NOT Broadcasting extend intent ACTION_SIM_STATE_CHANGED " + value
+ " reason " + reason);
return;
}
Intent intent = new Intent(TelephonyIntents.ACTION_SIM_STATE_CHANGED_EXTEND);
//intent.addFlags(Intent.FLAG_RECEIVER_REPLACE_PENDING);
intent.putExtra(PhoneConstants.PHONE_NAME_KEY, "Phone");
intent.putExtra(IccCardConstants.INTENT_KEY_ICC_STATE, value);
intent.putExtra(IccCardConstants.INTENT_KEY_LOCKED_REASON, reason);
intent.putExtra(PhoneConstants.GEMINI_SIM_ID_KEY, mSimId);
if (DBG) log("Broadcasting intent ACTION_SIM_STATE_CHANGED_EXTEND " + value
+ " reason " + reason + " sim id " + mSimId);
ActivityManagerNative.broadcastStickyIntent(intent, READ_PHONE_STATE,
UserHandle.USER_ALL);
}
}GsmServiceStateTracker会去刷新运营商名称，有需要的话，还会重新选择注册网络。
右键复制图片地址，在浏览器中打开即可查看大图。
未完待续，有不对的地方，请指正。
郑重声明：本站内容如果来自互联网及其他传播媒体，其版权均属原媒体及文章作者所有。转载目的在于传递更多信息及用于网络分享，并不代表本站赞同其观点和对其真实性负责，也不构成任何其他建议。
